ADB Eurodim Twin Tech handleiding
Handleiding
Je bekijkt pagina 55 van 96
EURODIM TWIN TECH
Page 53 sur 92
7.6 TEST AND FLASH MENU
This menu is used to test the outputs of each circuit via a command from controller 1 or 2.
In order to be able to control a circuit (output) or a set of circuits with respect to controller 1 or 2 (if
present), verify the position of the cabinet selector in order to ensure that it matches the control by the
controller selected on the screen.
Select the controller that is to control the output to be tested, touch-key "CTRL 1" or "CTRL 2".
Note: When a test or a flash is launched, the DMX/ARTNET /sACNare cut off.
7.6.1 Test Tab
Touch to select the test tab.
Used to control a circuit with constant intensity.
Output/patch
relationship
Bekijk gratis de handleiding van ADB Eurodim Twin Tech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | Eurodim Twin Tech |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 19177 MB |
