ADB Eurodim Twin Tech handleiding
Handleiding
Je bekijkt pagina 44 van 96
EURODIM TWIN TECH
Page 42 sur 92
Selecting a cue
To select a cue, go to the cue number (highlighted), either by touching the screen or using the wheel.
To edit the cue number:
− Touch the screen or use the wheel to select the zone of the number in question,
− Type the number using the keyboard,
− Validate the cue by touching the screen to select the zone in question, or using the wheel.
Otherwise, press keyboard key 1 to scan the cues in ascending order, or press keyboard key 0 to scan the
cues in descending order.
Important: when a cue is edited, there is a loading time. The status row at the bottom of the page informs
the user of this status. Wait for the synchronisation to be complete in order to obtain a correct
reading of the intensities of each of the cue’s circuits.
7.4.2.1 DMX/ARTNET/sACN Capture
Press the "CAPTURE" key to launch the memorisation operation. The values appear in the table after a few
seconds. The cue number is followed by an asterisk (*) to indicate that the captured DMX/ARTNET/sACN
Bekijk gratis de handleiding van ADB Eurodim Twin Tech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | Eurodim Twin Tech |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 19177 MB |
