ADB Eurodim Twin Tech handleiding
Handleiding
Je bekijkt pagina 41 van 96
EURODIM TWIN TECH
Page 39 sur 92
To edit the cue number:
− Touch the screen or use the wheel to select the zone of the number in question,
− Type the number using the keyboard,
− Confirm the cue to be edited by touching the zone, or use the wheel.
Otherwise, press keyboard key 1 to scan the cues in ascending order, or press keyboard key 0 to scan the
cues in descending order.
Important: When a cue is edited, there is a loading time. The status row at the bottom of the page informs
the user of this status. Wait for the synchronisation to be complete in order to obtain a correct
reading of the intensities of each of the cue’s circuits.
Attributing intensity
To attribute a control intensity, position on a row using the wheel:
− Touch the zone where the intensity is displayed in order to edit the value,
− Enter the value using the numeric keyboard (between 0 and 100%)
− Touch the zone where the new value is displayed in order to validate.
To identically recopy the intensity of the preceding circuit, use keyboard key.
Note: If the value attributed is 100%, the screen displays FF. Any value entered that is beyond 100 is
limited to 100.
Any value entered into a non-existing cue will render it existing.
The backup (validation) of the intensities is conducted upon leaving the cue or function.
7.4.1.1 Range Key
Used to attribute the same intensity to a set of circuits, included within a range.
Bekijk gratis de handleiding van ADB Eurodim Twin Tech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ADB |
| Model | Eurodim Twin Tech |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 19177 MB |
