Acti Z959 handleiding
Handleiding
Je bekijkt pagina 5 van 22
www.acti.com
Hardware Manual
5
Safety and Compliance Information
Installation and removal of the unit and its accessories must be carried out by qualified
personnel. You must read all of the Safety Instructions supplied with your equipment before
installation and operation.
Installation
• This device is a class A product and may cause radio interference. Take measures if
necessary.
• Make sure the camera operates in an environment where the temperature and humidity
meet requirements. Keep the camera from excessive pressure, vibration, moisture, dust,
and intensive electromagnetic radiation.
• Use a power adapter or a PoE device that meets requirements. Otherwise, the device
may be damaged.
• Make sure the length of the power cable between the power adapter and the camera is
not too long, otherwise the voltage of the camera is lowered, causing the camera to work
abnormally. If it is required to lengthen the power cable, lengthen the cable between the
power adapter and the mains.
• Do not hold the tail cable by hand for weight bearing. Otherwise, the cable connector of
the camera could be loosened.
• Do not cut the tail cable. Exposed tail cables may cause short circuit and damage the
camera.
• When connecting to an external interface, use an existing connection terminal, and
ensure that the cable terminal (latch or clamp) is in good condition and properly fastened.
Ensure that the cable is not tense during mounting, with a proper margin reserved to
avoid poor port contact or loosening caused by shock or shake.
• The end of the tail cable must be kept under good protection. Take waterproof measures
to protect the tail cable.
• During the process of transportation, special attention is required for the protection of the
transparent dome cover to prevent friction, scratch and contamination, etc. In order to
keep the cover clean, do not remove the protective film on the cover during mounting.
After mounting is finished, remove the film before the device is powered on.
• Contact professionals for maintenance information. Do not attempt to dismantle the
device by yourself. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
Bekijk gratis de handleiding van Acti Z959, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acti |
| Model | Z959 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3166 MB |
