Acti R73C-32 handleiding
Handleiding
Je bekijkt pagina 5 van 17
www.acti.com
USER’S MANUAL
5
Cautions:
• Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrating surface or
places subject to shock (ignorance can cause equipment damage).
• Do not place the device in extremely hot (refer to the specification of the device for the
detailed operating temperature), cold, dusty or damp locations, and do not expose it to
high electromagnetic radiation.
• The device cover for indoor use shall be kept from rain and moisture.
• Exposing the equipment to direct sun light, low ventilation or heat source such as heater
or radiator is forbidden (ignorance can cause fire danger).
• Do not aim the device at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor
at the same time.
• Please use the provided glove when opening up the device cover, avoid direct contact
with the device cover, because the acidic sweat of the fingers may erode the surface
coating of the device cover.
• Please use a soft and dry cloth when cleaning inside and outside surfaces of the device
cover, do not use alkaline detergents.
• Please keep all wrappers after unpacking them for future use. In case of any failure, you
need to return the device to the factory with the original wrapper. Transportation without
the original wrapper may result in damage to the device and lead to additional costs.
• Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
• Biometric recognition products are not 100% applicable to anti-spoofing environments. If
you require a higher security level, use multiple authentication modes.
• Working temperature: 0 °C to 50 °C; Working humidity: 10% to 90% (no condensing)
• Indoor use. The device should be at least 2 meters away from the light, and at least 3
meters away from the window.
• Outdoor use or use in environment exceeding the device temperature measurement will
affect the temperature measurement accuracy.
Bekijk gratis de handleiding van Acti R73C-32, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acti |
| Model | R73C-32 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1678 MB |
