Acti PMAX-0318 handleiding
Handleiding
Je bekijkt pagina 8 van 22
www.acti.com
Hardware Manual
8
Step 2: Mount the Camera
1. Check whether the camera comes with the cable coming out from the side or the bottom
cable hole.
If the cable is coming out from the bottom hole of the camera, insert the cable through
the wall mount.
If the cable is coming out from the side cable hole, you can do one of the following:
A. Remove the bottom tab of the wall mount. Then, leave the cable as it is and proceed
to the next step (installing the camera on the wall mount). The cable can later go
through the gap on the wall mount.
B. Remove the cable coming out from the camera side and move it to go through the
bottom cable hole, see How to Move the Camera Cable From Side to Bottom on
page 13 for instructions. This method provides a cleaner installation but the
procedure is a bit tedious. Depending on the installation environment, you may skip
this step and do Option A instead.
Bekijk gratis de handleiding van Acti PMAX-0318, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acti |
| Model | PMAX-0318 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5834 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Soort | Support |
| Materiaal behuizing | Aluminium |
| Merkcompatibiliteit | ACTi |
| Compatibiliteit | A92, Z91, A61, A62 |
