Acti PMAX-0318 handleiding
Handleiding
Je bekijkt pagina 18 van 22
www.acti.com
Hardware Manual
18
Using the Default Camera IP Address
If there is no DHCP server in the given network, the user may have to assign the IP addresses to
both PC and camera manually to make sure they are in the same network segment.
When the camera is plugged into network and it does not detect any DHCP services, it will
automatically assign itself a default IP:
192.168.0.100
Whereas the default port number would be 80. In order to access that camera, the IP address of
the PC has to be configured to match the network segment of the camera.
Manually adjust the IP address of the PC:
In the following example, based on Windows 7, we will configure the IP address to 192.168.0.99
and set Subnet Mask to 255.255.255.0 by using the steps below:
1
2
3
4
Bekijk gratis de handleiding van Acti PMAX-0318, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acti |
| Model | PMAX-0318 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5834 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Soort | Support |
| Materiaal behuizing | Aluminium |
| Merkcompatibiliteit | ACTi |
| Compatibiliteit | A92, Z91, A61, A62 |
