Acti PMAX-0305 handleiding
Handleiding
Je bekijkt pagina 27 van 33
www.acti.com
Installation Guide
27
3. If necessary, connect the colored wires to digital input or output (DI/DO) devices to trigger
events or notifications.
NOTE: Follow the wiring instructions described in the Camera Hardware Manual
downloadable from the website (www.acti.com).
4. Attach the female-type socket to the power cable in the junction box, and connect the power
cord to the socket.
NOTE:
Only a power cable fits through the conduit hole of the junction box; thus the
installation of a power outlet to the power line cable must be done inside the junction
box.
Use only the supplied power adapter and power cord that came with the camera or
the optional High PoE Injector (PPOE-0110). Using other accessories not approved
by the manufacturer may cause damage to the equipment.
5. Close the junction box door using the four (4) screws supplied with the junction box.
NOTE: Make sure the side is door is tightly sealed to ensure water does not enter the junction
box.
6. On the network side, connect the other end of the Ethernet cable to a network switch.
7. On the power supply side, attach the male-type plug on the other end of the power cable, and
then connect it to a power outlet.
Bekijk gratis de handleiding van Acti PMAX-0305, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acti |
| Model | PMAX-0305 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8159 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Breedte | 145 mm |
| Diepte | 232 mm |
| Hoogte | 90 mm |
| Soort | Support |
