Handleiding
Je bekijkt pagina 27 van 40
Installation procedure
1.
Put one of the metal clamps on one of the ends of the hose
and connect this end of the hose to the gas supply located
on the part back of the range (Fig. 1).
2.
Use a screwdriver to tighten the metallic clamp around
the hose (Fig. 2).
3. Place the other bracket on the other end of the gas
hose and connect the other end of the hose to valve in
the gas cylinder. Tighten the metal bracket with the
screwdriver (Fig. 3).
4.
Make sure the gas valve is closed before making the
connection to the gas tank (Fig. 4)
IMPORTANT:
5.
After the gas supply has been installed, check that
there is no leakage by applying soapy water to all
connections and joints of the hose and pipes. If
you see bubbles coming out, the installation was
not carried out correctly and must be installed
again (fig. 5).
The hose should not be bent, tense or too close to
heat sources.
3.
The flexible PVC hose (reinforced polyester, 3/8”) for gas must withstand temperatures above 120° C and must be
approved by the local regulations and be within the validity period.
Use the hose only for domestic use. Make sure the hose is resistant to abrasion and chemicals.
The hose must be replaced before the expiration date indicated by the supplier or at least before 5 years of use.
The gas hose should not cross behind the back of the stove after installation.
The hose should be protected against direct exposition to sun light.
The hose shouldn’t exceed a length of 1.25 m.
4. Screwdriver
27
Bekijk gratis de handleiding van Acros AF5431B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acros |
| Model | AF5431B |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9551 MB |
Caratteristiche Prodotto
| Soort bediening | Draaiknop |
| Kleur van het product | Zwart |
| Ingebouwd display | Nee |
| Breedte | 795 mm |
| Diepte | 580 mm |
