ACR G406-4 handleiding
Handleiding
Je bekijkt pagina 61 van 70
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
G406-4 (453-5012)
570-5012 Rev. P Company Confidential 25-62-21 Page 61 of 70
SUBTASK 25-62-21-450-002
B. New Battery Installation
CAUTION: DO NOT USE CONTACT CLEANER ON ELT COMPONENTS. SUCH CHEMICAL AGENTS
CAN BE HIGHLY DESTRUCTIVE TO THE MOUNTING HARDWARE AND ELT HOUSING,
CAUSING CRACKING, FRACTURING AND OTHER DAMAGE.
1) This subtask applies to installation of a new (i.e., replacement) battery.
2) Verify the bottom of the ELT is clean and free of battery corrosion residue. Clean as necessary.
3) Remove the paper backing from the rubber seal at the connector end of the battery pack.
4) Perform the procedure outlined in SUBTASK 25-62-21-450-001 on page 59.
5) Place a new battery expiration date label on the ELT mounting frame cap or other visible location.
NOTE: The new label is supplied with the new battery pack.
6) Enter the pertinent battery replacement information in the logbook (i.e., aircraft records) and fill out
any other required documentation.
Bekijk gratis de handleiding van ACR G406-4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ACR |
| Model | G406-4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8218 MB |
