ACR G406-4 handleiding
Handleiding
Je bekijkt pagina 54 van 70
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
G406-4 (453-5012)
570-5012 Rev. P Company Confidential 25-62-21 Page 54 of 70
10) Bundle the wiring into a complete harness, with breakouts as appropriate, such that the wiring can be
properly supported and attached to the airframe. Refer to the aircraft manufacturer’s written instructions
or AC 43.13-1, Chapter 11, § 9 through 12, as applicable.
SUBTASK 25-62-21-450-002
C. ELT 12-Pin Receptacle Installation
1) Feed the harness wires on the ELT end through the mounting frame cap assembly (452-0228). See
Figure 20 Remote Harness Wiring at ELT End.
Figure 20 Remote Harness Wiring at ELT End
2) Feed the buzzer wires on the ELT end through the mounting frame cap.
3) Fabricate a short jumper wire, approximately 1.5 in. (38 mm) long.
a) Strip approximately 0.15 in. (3 mm) of insulation from both ends of each of the wire.
b) Dress and tin the bare wire ends to prevent the strands from fraying during terminal crimping
operations.
c) Crimp male terminal pins (151-6627) to each of the wire ends, using Molex crimp tool 63811-
3300, or an equivalent tool for 0.062 in. terminal pins.
4) Insert the wiring pins in the harness ELT 151-5012 Molex 12-pin receptacle. See Figure 19 Remote
Switch Harness Wiring Diagram on page 53.
CAUTION: THE ELT WILL NOT AUTOMATICALLY ACTIVATE IF THE JUMPER (G-SWITCH LOOP)
IS NOT PROPERLY INSTALLED IN THE HARNESS ELT RECEPTACLE.
a) Insert the jumper ends in Pin 5 and Pin 8 of the receptacle.
NOTE: Terminal pins may be removed from the receptacle using Molex extraction tool
11030002, or equivalent.
b) Insert the harness ELT wire ends into the receptacle, making a record of wire identification and
pin relationships for reference when terminating the harness wires in the remote switch plug.
Bekijk gratis de handleiding van ACR G406-4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ACR |
| Model | G406-4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8218 MB |
