ACR G406-4 handleiding
Handleiding
Je bekijkt pagina 46 van 70
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
G406-4 (453-5012)
570-5012 Rev. P Company Confidential 25-62-21 Page 46 of 70
SUBTASK 25-62-21-450-002
B. Installation
1) See Figure 13 Typical Mounting Tray Installation.
Figure 13 Typical Mounting Tray Installation
2) Install the necessary mounting structure as appropriate for the specific installation.
3) Align the mounting tray (452-0227) on the mounting structure, such that the arrow on the tray is
within 10° of the longitudinal axis of the aircraft and pointing in the direction of flight.
4) Mark the four holes needed for mounting the tray, using the tray as a pattern. The hole pattern is
also illustrated in Figure 12 G406-4 ELT Outline and Dimensions on page 45.
5) Drill the four mounting holes with a #19 or 4.25 mm drill.
6) Install the mounting tray with the 8-32 x 5/8” SS pan head Philips screws, flat washers, lock washers,
and nuts provided in the installation kit (455-7421), as shown in Figure 13 Typical Mounting Tray
Installation. Torque to 12 ±1 lb-in (136 ± 11 N•cm).
NOTE: The use of substitute mounting hardware is acceptable provided the hardware used
meets or exceeds the strength and corrosion resistance of the original hardware.
Bekijk gratis de handleiding van ACR G406-4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ACR |
| Model | G406-4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8218 MB |
