ACR C406-2 handleiding

Niet gecategoriseerd

ACR

66 pagina's

PDF beschikbaar

Handleiding

ARTEX PRODUCTS / ACR ELECTRONICS, INC 
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL 
C406-2 (453-5000), C406-2HM (453-5001) 
570-5000 Rev. V  Company Confidential  25-62-11  Page  15  of  66 
SCREEN ROOM  The term “Screen Room”, within the context of this document, refers to a room 
designed to suppress RF signals, such that the broadcast of an ELT placed in 
the screen room cannot reach the SAR satellite system. 
SERVICE LOOP  A length of wire or cable, at the connection point, of sufficient length to allow a 
component to be withdrawn from its mounting position and disconnected from 
its associated wiring. 
TETHER  A tether is a cord or similar device that anchors something movable to a 
stationary point or anchors two items together, such that they cannot become 
separated beyond the length of the tether. 
TNC CONNECTOR  A threaded version of a BNC connector. 
TPS CONNECTOR  A small, rugged, three-pin bayonet locking connector designed for use when 
space and weight limitations are of primary concern. 
TSO  Technical Standard Order – A TSO is a minimum performance standard issued 
by the FAA for specified materials, parts, processes, and appliances used on civil 
aircraft. 
UTC  Coordinated Universal Time – A time standard based on International Atomic 
Time. UTC is the time system used in aviation and is often associated with 
Greenwich Mean Time (GMT) and/or “Zulu” time. 
VHF  Very High Frequency – The 30 MHz to 300 MHz radio frequency band. 
VSWR  Voltage Standing Wave Ratio – Electrical signals will “echo” back on a wire if 
load impedance is not matched to the impedance of the wire. VSWR is a 
measurement of the amount of voltage being “echoed,” compared to the 
original signal. 
TASK 25-62-11-990-806 
6.  References 
SUBTASK 25-62-11-990-001 
A.  Regulatory Documents 
1)  The following regulatory documents are referred to herein. When referring to such documents, it is 
the manual user’s responsibility to ensure they are using the latest revision or release of such 
documents. To that end, the revision designator of specific document numbers has not been 
included, with the exception of the RTCA document listing, which reflects the revision level of the 
documents at the time of TSO testing and certification. 
2)  Except in the case of a printed manual, reference documents available on-line or source locations are 
linked to applicable web sites. 
3)  United States 
a)  AC 43-9, “Maintenance Records” 
b)  AC 43-210, “Standardized Procedures for Requesting Field Approval of Data, Major Alterations, 
and Repairs” 
c)  AC 43.9-1, “Instructions for Completion of FAA Form 337” 
d)  AC 43-13-1, “Acceptable Methods, Techniques, and Practices – Aircraft Inspection and Repair” 
e)  AC 43.13-2, “Acceptable Methods, Techniques, and Practices - Aircraft Alterations” 
f)  FAR, Part 43, “Maintenance, Preventive Maintenance, Rebuilding, and Alteration” 
g)  FAR, Part 91, “General Operating and Flight Rules” 
4)  Canada 
a)  CAR, Part V, “Airworthiness” 

Bekijk gratis de handleiding van ACR C406-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.