ACP MFS18TS handleiding

17 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 12 van 17
12
Digital Dial Operation
Digital Dial option is available on some models only.
The switching operation of this
microwave oven can cause voltage
uctuations on the supply line.
The operation of this oven under
unfavorable voltage supply conditions
can have adverse e󰀨ects. This device
is intended for the connection to a
power supply system with a maximum
permissible system impedance Zmax
of 0.2 Ohms at the interface point of
the users supply. The user has to
ensure that this device is connected
only to a power supply system
which fullls the requirement above.
If necessary, the user can ask the
public power supply company for the
system impedance at the interface
point.
Oven Wall Clearances
A—Allow at least 2” (5.1 cm) of clearance
around top of oven. Proper air ow around
oven cools electrical components. With
restricted air ow, oven may not operate
properly and life of electrical parts is
reduced.
B—There is not an installation clearance
requirement for the back of the oven.
C—Allow at least 1” (2.54 cm) of clearance
around sides of oven.
D—Install combination oven so oven bottom is
at least 3 feet (91.5 cm) above oor.
No metal pans
DO NOT power spray
So...how do I use it? (Digital Dial)
Heating
1. Open oven door, place food in oven, and close oven door.
2. Turn time entry knob clockwise to desired time.
Cooking time can be set up to 6 minutes.
Oven begins operation and time counts down.
3. When cooking time has elapsed, microwave energy stops and oven
signal sounds.
Interrupting Operation
Open oven door to interrupt operation or turn time entry knob
counterclockwise to “0”. To resume microwave oven operation, close oven
door.
If time was changed to “0”, time will need to be reset.
Changing Time and Canceling Mistakes
Heating time can be changed at any time while the oven is operating.
Turn knob to desired new setting. To set cooking time to zero, turn knob
counterclockwise to “0”.
B
A
C
STYLE 1

Bekijk gratis de handleiding van ACP MFS18TS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkACP
ModelMFS18TS
CategorieMagnetron
TaalNederlands
Grootte2233 MB