Handleiding
Je bekijkt pagina 11 van 24
©2020 ACP, Inc.
Cedar Rapids, IA 52404
Page 11 of 24
Part No. 20267401
Revised 9/2020
STYLES 1 & 4 Programming
Manual Programming Mode
Allows operator to edit preset programs and/or create new programs for
customized cooking.
Note: Manual Programming must be enabled in User Options
From READY or DOOR OPEN screen:
1. Press and hold number keypad “3”/ PROGRAM
• Oven will display list of preset program and available locations
• The rst available location will be highlighted. If no locations are available, the
rst preset program on the rst page will be highlighted.
• Display automatically toggles to the next page of program locations every 2
seconds. Select the START pad to manually toggle to next page.
2. Press number keypad(s) to open the desired program location
• PROGRAM ENTRY screen is displayed.
3. To edit name: Press number keypad “0”
• EDIT NAME screen is displayed
• Press number keypads to enter program name.
• Press START/OK keypad to save and return to program entry screen.
4. To edit cook time for Stage One: Press number keypad “1”
• Press number keypads to enter cook time
• Press START/OK keypad to save and return to program entry screen
5. To edit power level for Stage One: Press number keypad “5”
• Press number keypads to enter % microwave power (“1”=10%, “2”=20%,etc.)
For 100% power level, press and hold number keypad “2”/ POWER LEVEL
• Press START/OK keypad to save and return to program entry screen
6. To save and exit programming mode: Press START/OK keypad
Manually Programming Multiple Stages
Stage cooking allows consecutive cooking cycles (stages) without interruption.
Up to four dierent cooking cycles can be programmed
1. Follow “Manual Programming Mode” steps 1-5 above.
2. Repeat steps 4-5 for each additional stage, substituting corresponding number
keypads for each stage.
Example: For stage two, press number keypad “2” to edit cook time, and press number
keypad “6” to edit power level.
3. To save and exit programming mode: Press START/OK keypad
3
1
2
5
4
Bekijk gratis de handleiding van ACP HDC1815, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ACP |
| Model | HDC1815 |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 4956 MB |
