Handleiding
Je bekijkt pagina 29 van 32
English
5. Input: Select the source from HDMI1(2.0), HDMI2(2.0), DP.
6. Auto Source: The default is “On”, which can support auto search for signal source in
order.
-----------------------------------------------------------------------------------------------------------
Note:
Surround application must set Auto Source is “O”.
7. Wide mode: You can select which screen aspect you are using. The options are Aspect
and Full.
8. Hot Key Assigment: Select the function of shortcut key 1 and keys 2.
---------------------------------------------------------------------------------------------------------
Note:
• Hot Key 1 and Hot Key 2 can`t repeat the same function.
• Hot Key 1 default is (Modes), Hot Key 2 default is (Brightness).
• Because some functions limit the Hot Key to be gray out and unavailable.
• Hot Key can dene of : (Modes, Brightness, Volume, Gamma, Contrast, Low
Blue Light, Over Drive, VRB).
9. DDC/CI: Allows the monitor settings to be set through the software on the PC.
-----------------------------------------------------------------------------------------------------------
Note:
DDC/CI, short for Display Data Channel/Command Interface, which allows
monitor controls to be sent via software.
10. HDMI Black level: Select to set HDMI black level.
11. Quick start mode: Select O or On. Turn on to speed up boot speed.
12. Deep sleep: When Deep Sleep is set to on and there is no signal, the monitor will enter
sleep mode, this mode can save power consumption.
13. Select Power-o USB charge ON/OFF to enable/disable Power-o USB charge
function.
Bekijk gratis de handleiding van Acer XB273UV3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Acer |
| Model | XB273UV3 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3009 MB |
