AccuTemp Evolution E62401E060 handleiding

Niet gecategoriseerd

AccuTemp

30 pagina's

PDF beschikbaar

Handleiding

Installation Manual I Installation

MP4053-2006

3.7 Electrical Requirements and Notices

The electrical voltage requirement is listed on the data plate that is located on the lower left side panel.

All AccuTemp Evolution Electric Steamers are supplied with a power cord and plug that must be connected to the

speciﬁed receptacle, see below for reference.

Make sure the voltage is within 10% of the voltage listed on the steamer data plate.

Connection to any other voltage not identiﬁed on the data plate will cause damage to the components and is not covered under

warranty.

Grounding provides a path for electric current to reduce risk of shock.

This product is equipped with a power cord having a grounding plug. If plug is removed or hard wired, UL approval is lost.

The plug must be plugged into a receptacle that is properly installed and grounded in accordance with all National, State and

local electrical codes or in the absence of local electrical codes with the National Electric Code, ANSI/NFPA 70, or the Canadian

Code, CSA C22.2 as applicable.

Under no circumstances shall the plugs grounding prong be cut or bent to ﬁt a receptacle other than the one speciﬁed.

Do not use any adapters.

Any in-ﬁeld modiﬁcation made that bypass the safety features of this appliance will result in serious injury or death. DO NOT

DIRECT WIRE THIS APPLIANCE.

Any in-ﬁeld modiﬁcations made without written authorization from AccuTemp Products, Inc. will void all written and oral

warranties.

ELECTRICAL SPECIFICATIONS

Notes:

1. Allow 3” between fryer, ranges, and other

hot surfaces.

2. 5’ power cord supplied with single or 3

phase.

3. For use on individual branch circuit only.

4. Do not connect to a circuit operating at

more than 150V to ground.

5. Dimensions outside brackets are inches,

in brackets are millimeters.

6. Each unit equipped with 3/4” male garden

hose connector

7. Each unit equipped with 3/4” barbed drain

line connector

8. DO NOT plumb a single drain line

between the 2 units. Each

unit must have a separate drain line.

E6 TABLETOP CONNECTED EVOLUTION

™

6 Pan, Electric Boiler-free Convection

Countertop Steamer

MM4216-2001

AccuTemp Products, Inc.

8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net

30.39

771.91

23.26

590.88

4.00

101.60

23.63

600.20

2.85

72.42

30.48

774.22

40.95

1040.13

15.53

394.49

8.56

217.42

1.99

50.47

4.04

102.54

11.61

294.77

6.29

159.87

3/4 IN. BARB

FOR OPEN-GAP

DRAIN

3/4 IN.

MGH WATER

CONNECTION

Steamer Model “E” Speciﬁ cations

Model #

E62081E060 E62083E100 E62083E150 E62301E070 E62401E060 E62403E110 E62403E130 E64005E110 E64803E140

Volts AC

208 208 208 230 240 208 240 240

380 400 41 5

440 480

Phase

1 3 3 1 1 3 3 3 3

Amps

29 28 42 32 25 22 26 32 14 14 15 16 17

Breaker Size

30 amp 30 amp 50 amp 50 amp 30 amp 30 amp 50 amp 20 amp 20 amp

Watts (kW)

6 10 15 7 6 8 11 13 9 10 11 12 14

NEMA Plug

L6-30P L15-30P 15-50P IEC 60309-2

220/250V

L6-30P L15-30P 15-50P IEC 60309-2

220/380-240/415V

L16-20P

VOLUTION

BOILER-FREE STEAMER

AccuTemp product may be covered by one or more US Patents. See www.accutempip.net

CONNECTED

CONNECTIONLESS

E6 TABLETOP CONNECTIONLESS EVOLUTION

™

6 Pan, Electric Boiler-free Convection

Connectionless Countertop Steamer

MM4221-2001

AccuTemp Products, Inc.

8415 North Clinton Park • Fort Wayne, IN 46825 • 800-210-5907 • 260-493-0415 • Fax 260-493-0318 • accutemp.net

Steamer Model “D” Speciﬁ cations

Model #

E62081D060 E62083D100 E62083D150 E62401D060 E62403D110 E62403D130 E62301D070 E64005D110 E64803D140

Volts AC

208 208 208 240 208 240 240 230

380 400 41 5

440 480

Phase

1 3 3 1 3 3 1 3 3

Amps

29 28 42 25 22 26 32 32 14 14 15 16 17

Breaker Size

30 amp 30 amp 50 amp 30 amp 30 amp 50 amp 50 amp 20 amp 20 amp

Watts (kW)

6 10 15 6 8 11 13 7 9 10 11 12 14

NEMA Plug

L6-30P L15-30P 15-50P L6-30P L15-30P 15-50P IEC 60309-2

220/250V

IEC 60309-2

220/380-240/415V

L16-20P

Notes:

1. Allow 3” between fryer, ranges, and other hot surfaces.

2. 5’ power cord supplied with single or 3 phase.

3. For use on individual branch circuit only.

4. Do not connect to a circuit operating at more than 150V to ground.

5. Dimensions outside brackets are inches, in brackets are millimeters.

VOLUTION

BOILER-FREE STEAMER

AccuTemp product may be covered by one or more US Patents. See www.accutempip.net

Bekijk gratis de handleiding van AccuTemp Evolution E62401E060, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.