Handleiding
Je bekijkt pagina 14 van 19
14
HOW TO CHANGE A PARAMETER VALUE
The hidden menu includes all the parameters of the instrument.
HOW TO ENTER THE HIDDEN MENU
1.
Enter the Programming mode by pressing the SET+DOWN keys for 3 seconds
(the “°C” or “°F” LED starts blinking).
2.
Release the keys, then again push the
SET+DOWN
keys for more than 7
seconds. The Pr2 label will be displayed immediately following the HY
parameter.
NOW YOU ARE IN THE HIDDEN MENU.
3.
Select the required parameter.
4.
Press the “SET” key to display its value
5.
Use UP or DOWN to change its value.
6.
Press “
SET
” to store the new value and move to the following
parameter.
To exit: Press SET+UP or wait for 15 seconds without pressing a key.
NOTE 1: If no parameter is present in Pr1, after 3 seconds the “noP”
message is displayed, keep the keys pushed until the Pr2 message is
displayed.
NOTE 2: the set value is stored even when the procedure is halted by waiting
for the time-out to expire.
* WARNING: When the measurement unit is changed the SET point and the
values of the following parameters Hy, LS, US, OT, ALU, and ALL must be checked
and modified if necessary.
Bekijk gratis de handleiding van Accucold SCFF262GRH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Accucold |
| Model | SCFF262GRH |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 2459 MB |
