AC Infinity Cloudline T8 handleiding
Handleiding
Je bekijkt pagina 29 van 60
29
AUTO MODE (LOW TEMPERATURE TRIGGER)
Pressing the up or down button sets the low
temperature trigger. The fans will activate if the
probe’s reading meets or falls below this threshold.
Once triggered, the fan will gradually ramp up to the
speed set in ON mode. If the probe’s reading rises
above this trigger point, the fans will gradually slow
down to a stop or at the speed set in OFF mode.
You may set this trigger above the high temperature
trigger to create a specific range in which the fan
is active.
TRIGGER MODE: (HIGH HUMIDITY TRIGGER)
Pressing the up or down button sets the high
humidity trigger. The fans will activate if the probe’s
reading meets or exceeds this threshold.
Once triggered, the fan will gradually ramp up to the
speed set in ON mode. If the probe’s reading falls
below this trigger point, the fans will gradually slow
down to a stop or at the speed set in OFF mode.
You may set this trigger below the low humidity
trigger to create a specific range in which the fan
is active.
Note that this trigger can activate as long
as you are in AUTO Mode, even if you are
viewing a different trigger within AUTO Mode.
If there is a speed set in OFF Mode other than
zero, the fans will run at that speed when
triggered to turn off.
Note that this trigger can activate as long
as you are in AUTO Mode, even if you are
viewing a different trigger within AUTO Mode.
If there is a speed set in OFF Mode other than
zero, the fans will run at that speed when
triggered to turn off.
PROGRAMMING
Bekijk gratis de handleiding van AC Infinity Cloudline T8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AC Infinity |
| Model | Cloudline T8 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 3255 MB |
