Abus Smartvest Pro APP45000 handleiding
Handleiding
Je bekijkt pagina 93 van 116
| 93
the hallway at the keypad) and pass the corresponding detectors on your way out without
triggering the alarm. If the factory setting is too short or too long, set a duration that suits you.
• Length of the time delay (10-60 seconds in 10-second increments)
• Activation of the sound for internal arming and exit delay
• Integration or exclusion of components
3.12.3 Disarmed
Here you can make settings that occur when the Smartvest Pro is disarmed.
• Activation of the entry delay when disarming.
• Time delay/entry delay: Suppresses the alarm and any congured automations/scenarios and
push notications for the selected duration. This allows you to pass through opening detectors,
motion detectors and vibration detectors when you come home, for example, and disarm the
alarm system on the keypad with your code or ID key fob without triggering an alarm. If the
factory setting is too short or too long for you, set a duration that suits you.
• Length of the time delay (10-60 seconds in 10-second increments).
• Activation of the sound during the entry delay.
3.12.4 Hazard detector alarm
Note: Hazard detectors e.g. smoke detectors, water detectors and vibration detectors (if round-the-
clock mode is activated) are active in every status. They always trigger an alarm in the corresponding
case, even if the alarm system is disarmed.
If a component reports danger (e.g. smoke detector), you can set another component to be activated
(e.g. socket, or start a camera recording).
Bekijk gratis de handleiding van Abus Smartvest Pro APP45000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Abus |
| Model | Smartvest Pro APP45000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12469 MB |
