Abus Smartvest Pro APP45000 handleiding
Handleiding
Je bekijkt pagina 66 van 116
| 66
3.5.4 Wireless magnetic contact
To register the magnetic contact in the Smartvest Pro alarm panel, please proceed as follows:
Preparatory steps
1. You need the Smartvest Pro iOS / Android app.
2. You must keep the magnetic contact to hand.
3. Please ensure that the magnetic contact to be registered and the Smartvest Pro alarm panel
are in close proximity to each other.
Integration into the alarm system
1. Register a component via the "Settings" menu in the app under the menu item "Manage
components" > "Add new component".
2. Select the relevant component from the list.
3. Assign a name for each component (this is used for notications, for example) and assign a
room.
4. Press the "Next" button in the app and activate the battery during the app countdown. There
are two ways to do this.
• If the magnetic contact is new, there is a transparent plastic tape on the side. Pull this
out of the detector during the app countdown to complete the set-up process.
• If you have already removed the plastic tape, please remove the battery, wait at least
5 seconds and reinsert it again.
5. The successful addition of a component is conrmed in the app and you can now manage and
use the added component in the settings.
Bekijk gratis de handleiding van Abus Smartvest Pro APP45000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Abus |
| Model | Smartvest Pro APP45000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12469 MB |
