Abac G-201 handleiding
Handleiding
Je bekijkt pagina 76 van 205
7.1 MAINTENANCE AND REPAIRS
All quality tools may require maintenance over
time or replacement of parts due to normal
operating wear.
These operations must be carried out ONLY by
an authorized technician.
NEVER TRY TO REPAIR THE TOOL YOURSELF.
7.2 TROUBLESHOOTING
PROBLEM CAUSES SOLUTIONS
1 Air leak in the tool cover or trigger
area.
Loose screws.
Worn or damaged o-rings or seals.
Tighten the screws. Install a repair
kit.
2 The tool does not operate or
operates slowly.
Inadequate air supply.
Insufcient lubrication.
Worn or damaged o-rings or seals.
Check the screws. Install a repair
kit.
3 Air leakage in the bottom part of
the tool.
Loose screws.
Worn or damaged o-rings or seals.
Tighten the screws. Install a repair
kit.
4 The tool vibrates. Accessory damaged.
Tool damaged.
Replace the damaged accessories.
Contact your local distributor for
service
5 Other problems Contact your local distributor for
service.
EN
7. REPAIRING THE TOOL AND TROUBLESHOOTING
WARNINGS: Disconnect the air supply
from the tool before carrying out any
maintenance procedures.
76
Bekijk gratis de handleiding van Abac G-201, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Abac |
| Model | G-201 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20820 MB |
