Abac G-201 handleiding
Handleiding
Je bekijkt pagina 16 van 205
• Before connecting the hose to the tool please check, whether the hose and the quick coupler are clean. Do this
by letting air run freely through hose and quick coupler.
• Choose and replace the engaged accessory according to the instructions in the manual, in order to prevent
unnecessary noise.
• Use accessories that are suitable for the application and that are in compliance with the device, and connect
them properly. Check that they are being used as per instructions and that they are correctly installed.
• Check the wear status of the tools and accessories before every use. Replace them if necessary.
• In case of tool replacement, during maintenance operations and when nished working disconnect compressed
air connection.
• Disconnect the tool only when the hose is NOT pressurized in order to avoid its uncontrolled motion.
• Keep the work area neat.
• Make sure the tool has come to a full stop before you lay it on the ground
• Store the pneumatic tool clean and in a dry place
• Always make sure the work station is steady.
• Firmly hold the work piece with a clamp or a xing tool.
• Use the tool only for its original application. The manufacturer waives any liability for damages arising out of
the non observation of safety regulations or for tool misuse.
• Use only accessories that are suitable for the tool in use.
• The quality of the compressed air must be good, which means clean, dry and this is best assured by means of an
air lter. We advise the use of a complete FRL (lter, regulator, lubricator) unit. The oiler has to be adjusted to
approx. 3 to 6 droplets per minute. The air hose between oiler and tool should never exceed a length of 6 to 8
meters.
• Pneumatic tool and more specically demotion hammers generate vibrations. An extended use and a wrong
posture may cause damage to hands, ngers and elbows. Immediately pause using the product as soon as you
feel any pain, tingling sensations or any other disorder. Should the problem persist, seek a physician’s advice
before resuming your work.
EN
16
Bekijk gratis de handleiding van Abac G-201, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Abac |
| Model | G-201 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20820 MB |
