A-NeuVideo ANI-4K-VW handleiding
Handleiding
Je bekijkt pagina 13 van 20
PC Application Control
PC Application Control
I/O Setup
q
OUTPUT RESOLUTION & OSD MENU ADJUSTMENT:
All settings under I/O Setup can be done with a single
TV Wall unit or units with a single click on “ALL IP”.
Parameters and default values are as stated in the RS-
232 description parameters.
w
MUTE: Set Audio Mute to ON/OFF.
e
OSD INFO: Show/Close OSD information.
r
REFRESH: Refresh current page.
t
RESET: Reset current page.
Image Adjust
q
BRIGHTNESS, CONTRAST, SATURATION AND
HUE ADJUSTMENT: Again all settings under Image
Adjust can be done with a single TV Wall device or
multiple TV Wall devices with a single click on “ALL IP”.
Parameters and default values are as stated in the RS-
232 description.
w
PICTURE RESET: Picture Reset button is to reset all
settings of Image Adjust back to factory default values.
e
REFRESH: Refresh button is to refresh Image Adjust
page only.
Note:
1. When the Input signal is above 4K2K, the device only
supports Color space RGB, YUV is not supported.
2. When on TV Wall split mode, dierent input/output
resolutions, signal is limited (please refer to the Timing
Limitations).
A NEUVIDEO
11
Bekijk gratis de handleiding van A-NeuVideo ANI-4K-VW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | A-NeuVideo |
| Model | ANI-4K-VW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2842 MB |
