2N Telecommunications EasyGate handleiding
Handleiding
Je bekijkt pagina 54 van 69
COM – Serial Interface 4.4
54
Outgoing and incoming calls can be made during GPRS connection. The GPRS
connection remains active during the whole call but no data can be transmitted
(EasyGate is a GPRS terminal of class B). Once the call is terminated, data
transmission is recovered immediately.
List of Supported AT Commands
There are original files related to SIEMENS GSM modules in the PDF format on the
EasyGate CD-ROM.
Caution
Since the GSM module is primarily used by the EasyGate central processor
for voice calls, use AT commands carefully. You might misconfigure the
GSM module thus making EasyGate inoperative. To solve most of these
problems, switch EasyGate off and on again to make the central processor
execute full initialization of the GSM module.
Do not use particularly:
ATQ1 AT+CMUT= AT^SNFI=
ATS3= AT+CMUX= AT^SNFM=
ATS4= AT+CSCS= AT^SNFO=
ATS5= AT^SAIC= AT^SNFPT=
ATV0 AT^SM20= AT^SNFS=
AT&C0 AT^SMSO= AT^SNFV=
AT+IPR= AT^SNFA= AT^SNFW=
AT+CFUN= AT^SNFD=
Bekijk gratis de handleiding van 2N Telecommunications EasyGate, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | 2N Telecommunications |
| Model | EasyGate |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6292 MB |
Caratteristiche Prodotto
| Markt positionering | Bedrijf |
| Ingangsspanning | 12 V |
| Soort apparaat | Gateway voor mobiele netwerken |
| Datanetwerk | GPRS, GSM |
| GSM bands ondersteund | 850,900,1800,1900 MHz |
