2N Telecommunications EasyGate Pro Handleiding (79 Pagina's)

Handleiding

Table of Parameters

3.2

45

Initialization of GSM & SIM Function No.: -

Initialization of all parameters related to the GSM (UMTS) network and SIM card

(except the PIN code).

SMS input initialization Function No.: -

Initialization of all parameters for SMS sending upon SMS input activation.

Global initialization Function No.: 999

Initialization of all EasyGate parameters including the PIN and service password.

Only Global initialization can be done by phone line programming. As parameter

of this function service password followed by must be used. This operation

isn’t followed by confirmation tone. Successful setting is followed by pause

(aprox.10s), during this time period is performed reset of configuration memory.

Than is the gateway restarted.

Security Parameters

PIN - value Function No.: 700

Fill in the PIN value for automatic PIN entering upon EasyGate power up. It is

applied only if the SIM card is PIN secured. If the given PIN fails to match the

SIM, it is deleted automatically. If entered via a telephone line upon EasyGate

start, the PIN is stored automatically.

Setting options: 0, 4-8 characters (0-9)

Upon full initialization: blank

Service password Function No.: 900

Fill the service password for programming via a telephone line. Some parameters

can be programmed by DTMF dialing and so the access to programming must be

password-protected.

Setting options: 4-8 characters (0-9)

Upon full initialization: 12345

Bekijk gratis de handleiding van 2N Telecommunications EasyGate Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.