2N Telecommunications EasyGate Pro Handleiding (79 Pagina's)

Handleiding

Table of Parameters

3.2

35

An example in the figure below shows how to bar all international calls with the

exception of calls to Slovakia including dialing acceleration by selecting the number

length parameter and tariff setting (5 impulses after call connect and then one

impulse every 10 seconds). All other calls are enabled and their tariff is one impulse

every 30 second.

Operator for Integra Function No.: 405

In some networks you can add to dialed number # character and PBX subscriber

number. Subscriber number is displayed on other side together with CLI. This

parameter take place when dialed number doesn't contain # character.

Setting options: 0-8 characters (0-9)

Default setting: blank

Caution!

n Configuration using phone line programming (DTMF) is applicable for line

‘Other prefixes’ only.

Prefix Function No.: -

A prefix identifying the call type (mobile, trunk call, free call, etc.). The letter ‘?’

can be used instead of any number. "Other numbers" line is used for calls with

prefixes that are not included in the table.

Setting options: 0-14 characters (0-9,*,#)

Default setting: blank

Call enable Function No.: 391

This parameter allows/bars calls with prefixes included on the same line.

Setting options: YES/NO

Default setting: YES

Figure 3.2

Routing table

Bekijk gratis de handleiding van 2N Telecommunications EasyGate Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.