2N Telecommunications 932081E Handleiding (110 Pagina's)

Handleiding

2N TELEKOMUNIKACE a.s., www.2n.cz 95/110

1.

2.

3.

3.2 Control

This subsection describes how to control when viewed by an 2N Helios IP Force

®

external user.

Speed Dial Buttons

Press the speed dial buttons on the basic unit to make quick dialling for the first 1, 2 or

4 positions (depending on the model type) in the telephone directory. Call setup is

signalled by a long intermittent tone or otherwise as configured in the PBX connected.

Repeated pressing of one and the same speed dial button during call setup may

initiate call termination, or call termination plus dialling the next telephone number of

the called subscriber, or may be assigned no function. This behaviour can be set in

unit configuration.

If your model is equipped with a numerical keypad, you can also push the button

anytime to terminate a call if enabled so in the parameter.Hang up with #

Calling to Telephone Directory Positions

The telephone directory can contain up to 1999 pre-programmed 2N Helios IP Force

®

positions. Speed dial can only be used for positions 1 to 4. The remaining positions can

be retrieved via the numerical keypad if the function is enabled Speed dial using digits

in configuration.

Procedure:

Enter the position number using your numerical keypad (05, 15, 200, 1759 e.g. –

two digits at least and four digits at most) and press for confirmation.

You can also push the button anytime to terminate a call if enabled so in the

parameter in the unit configuration.Hang up with #

Calling to Telephone Number

You can dial a telephone number using your numerical keypad from 2N Helios IP

®

if the parameter is on.Force Enable telephone function

Procedure:

Press the button.

You will hear the continuous tone from the loudspeaker.

Bekijk gratis de handleiding van 2N Telecommunications 932081E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.