2N Telecommunications 932081E handleiding
Handleiding
Je bekijkt pagina 65 van 110
2N TELEKOMUNIKACE a.s., www.2n.cz 65/110
The purpose of the tamper switch is to signal any unauthorised opening of the
intercom (to prevent a theft, e.g.). It is recommended to use the tamper switch.
Tip
FAQ: Tamper switch - How to install it into the 2N Helios IP Force
®
Specifications:
Card reader
Compatible with EM4100 / EM4102 / HID® Prox RFID cards
Operating frequency: 125 KHz
Minimum reading distance: 10 mm above cover2N Helios IP Force
®
Relay output
Switching contact
30 V / 2A AC/DC
Active output
12 V / 700 mA transistor switched output
Logical inputs
Active mode – requires external voltage (JP2 jumper OFF)
U -ON = min +2.5 V
IN
U -OFF = max +1.5 V
IN
U max = +48 V
IN
I (U +48 V) = max 1 mA
IN IN
Passive mode – requires external contact only (JP2 jumper ON)
U = approx. 8.3 V
OUT
I = approx. 0.5 mA
LOOP
Signalling output
Bekijk gratis de handleiding van 2N Telecommunications 932081E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | 2N Telecommunications |
| Model | 932081E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18445 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Type stroombron | DC |
| Aantal | 1 |
| Bedrijfsspanning (max) | 12 V |
| Stroomverbruik (max) | 0.23 A |
