2N Telecommunications 932081E Handleiding (110 Pagina's)

Handleiding

2N TELEKOMUNIKACE a.s., www.2n.cz 61/110

1.

2.

3.

a.

b.

c.

4.

5.

6.

7.

a.

b.

c.

8.

Specifications:

Passive switch: NO and NC contacts, up to 30 V / 1 A AC/DC

Active switch output: 9 V (Using PoE) or power supply voltage minus 1 V, from 9

to 13 V max. 700 mA DC

Tamper switch: 24 V / 50 mA AC/DC

Module mounting:

Switch off the intercom.

Remove the front panel from the intercom.

According to your model

If you are mounting the switch into a two-nameplate model, demount the

button PCB (1) and remove the right-hand bottom spacer (there are four

PCB fitting spacers altogether).

If you are mounting the switch into a keypad model, take the keypad out of

the holder. Demount the right-hand keypad holder - beam with a pin (8) –

remembering its position. Demount the right-hand bottom spacer. Do not

disconnect the keypad cable!

If you are mounting the switch into a model other than the two ones

mentioned in items 3a and 3b above, remove the right-hand bottom screw

from the main board.

Now screw the enclosed 12 mm spacer (5) into the vacated main board slot.

Mount the enclosed plastic support (6) onto the switch board bottom side.

Put the switch board (4) in the main board connector making sure that the

screw hole is directly above the spacer.

According to your model

If you are mounting the switch into a two-nameplate model, fit the switch

board with the enclosed 10.5 mm spacer (3) and reinstall the button PCB

(1).

If you are mounting the switch into a keypad model, reinstall the beam (8)

of the keypad holder (the slot is on top). Insert the enclosed 4.5 mm

washer (9) between the beam and the switch board, fitting the assembly

with the 15 mm screw enclosed (7).

If you are mounting the switch into a model other than the two ones

mentioned in items 7a and 7b, fit the switch board with the original 6 mm

screw (2).

Bekijk gratis de handleiding van 2N Telecommunications 932081E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.